Download Android 4.4 Kitkat 173389 stock firmware for Cube U27GT tablet

Download Android 4.4 Kitkat 173389 stock firmware for Cube U27GT tablet from here, here or from here.

Archive name: U27GT 3G_v1.02_20140526
Archive file size: 389 MB
Project: esky82_tb_cn_kk

Platform: MT6582
Config_version: V1.1.1


  Installing the ROM

1. Run flash tool “the Flash_tool.exe”

2. Choose “Scatter”  file.

3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.

4. Click the Download button on the Flash Tool.

5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.

6. You will then get a window with a green circle, indicating that the flash is complete.

7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.